cpa
I'm Learning!
Posts: 20
|
Post by cpa on Jul 11, 2007 20:17:12 GMT -5
on my A-5 i had put a lower (purple) spring in it an cut it down a touch so i could hit the 270 mark an not way above it. but i just recently put a 16" barrel on it an now can not go over 250 an thats with the v-screw set all the way in. im thinking with the 16" barrel i need to put the old spring back in an that will fix this problem.
can i get a 2nd opinion on this?
thx.
|
|
|
|
Post by Scotty on Jul 11, 2007 23:16:36 GMT -5
Velocity screw adjustment: For standard Tippmann side velocity adjustment.
Clockwise (in) = Decrease in velocity
Anticlockwise (out) = Increase in velocity
Conclusion: Back out your velocity screw a turn or so.
|
|
cpa
I'm Learning!
Posts: 20
|
Post by cpa on Jul 12, 2007 2:47:17 GMT -5
i wana say it wouldnt go higher when i did move it out. ill be there at 8 sunday an crono to make sure.
thx for the info. i was thinking the other way for some reason.
|
|
|
|
Post by Scotty on Jul 12, 2007 16:37:23 GMT -5
You should also install the stock drive spring.
|
|
roflcakes!!!